Uploaded File
add photo
Tyquan
tyquannixon@yahoo.com
347-608-4677
New York, NY 10001
Lead Technician
13 years experience W2
0
Recommendations
Average rating
38
Profile views
Summary

  • Low Voltage Cable technician with 12 years of experience.
  • Current on all OSHA requirements.
  • Install CCTV cameras (Analog and I.P) route data cables to each location and run cables such as CAT5 and CAT6 from the camera end to the DVR and power supply end, also maintained service for past installations.
  • Build racks for NVR and switches, Bent pipe half-inch 3/4inch 1inch or installed wire mold for cable management.
  • Install Access Control devices such as electric strike card reader PIR contacts etc.
  • Programmed IP CCTV cameras such as Acti and Axis to be on client's network for remote viewing and monitoring.
  • Terminated cables with BNC connectors or balums depending on the scope of work Installed Honeywell alarm system wired zones and panel with 18/4 wire and mounted input and output devices such as horn alarm motion detector window/door contacts etc.
  • Local and ready to start Monday 5/17.

I am a logical , vibrant calm young man. I graduated from a high / trade school called William e Grady in the bensonhurst area of Brooklyn , NY on Brighton 4th ave. I studied electrical engineering and electronics during my 4 years there. The beginning of my sophomore year I participated in a apprenticeship with my school called Secure Elevator Corp. which ended 2 years after I graduated. On my free time I like to read , play basketball or hang out with some friends. I am big on punctuality and enjoy working with others. I tend to think out of the box at times if neccessary and love having fun while working as long as the job gets done efficiently.

Experience
Lead Technician
Information Technology
Mar 2019 - present
Brooklyn, NY
  • Install & Program CCTV Systems
  • Ruff in new cables or camera refresh with existing cable and new cameras
  • Troubleshoot problems with wires or cameras
  • Set up DVR for remote viewing from mobile phone or CPU
  • Ruff in cables for Access Control and install devices
  • Troubleshoot problems for faulty devices or wires for access control
CCTV Low Voltage Cable Technician Structured Cabling
Remove Skill
Technician II
Information Technology
Oct 2018 - Jan 2019
  • Install and service IP cameras DVR Switch or encoders.
  • Install and service facial recognition cameras 360 cameras and PTZ cameras.
  • Program 360 cameras using config tool On Cam
  • Install Access Control devices such as electric strike card reader PIR contacts etc.
  • Program IP cameras to be viewed remotely
  • Program DVR to be on the same network as the switch.
  • Mount DVR and switch onto network rack securely
  • Remove all existing CCTV equipment and shipp DVR to a specific location.
CCTV
Remove Skill
Technician
Information Technology
Nov 2017 - Oct 2018
  • Install Analog and IP Cameras for commercial and residential applications.
  • Run composite cable for access control systems, mount and assemble hardware, worked with software such as Rosslare, Zkacess, and S2.
  • Programmed IP CCTV cameras such as Acti and Axis to be on client's network for remote viewing and monitoring.
Commercial CCTV
Remove Skill
Lead Technician
Information Technology
Jan 2014 - Apr 2017
  • Install CCTV cameras (Analog and I.P) route data cables to each location and run cables such as CAT5 and CAT6 from the camera end to the DVR and power supply end, also maintained service for past installations.
  • Build racks for NVR and switches, Bent pipe half-inch 3/4inch 1inch or installed wire mold for cable management.
  • Used balums rj45 or BNC connectors to terminate cables.
  • Configured NVR/DVR to be on routers network for cameras to be remotely views from Mobile device or CPU.
  • Test data jacks with fluke meter to insure cables were properly terminated.
Routers Switches Cat 5 Cat 6 CCTV
Remove Skill
Technician Apprentice
Information Technology
Sep 2008 - Mar 2014
  • Routed cables down elevator shafts for Analog CCTV cameras.
  • Used existing risers for cable runs if available. Cables such as CAT5 5e and CAT6 and coax siemese cable for CCTV systems.
  • Terminated cables with BNC connectors or balums depending on the scope of work Installed Honeywell alarm system wired zones and panel with 18/4 wire and mounted input and output devices such as horn alarm motion detector window/door contacts etc.
Alarm Systems Cat 5 Cat 6 CCTV Coaxial
Remove Skill
Edit Skills
Non-cloudteam Skill
Education
High School Diploma in Electrical engineering
William E Grady Career And Technical High School, 2008 - 2012
Certifications
OSHA 10
OSHA 30
Eagle Eye Certified
Brivo Certified
Skills
CCTV
2021
11
Cat 5
2017
8
Cat 6
2017
8
Alarm Systems
2014
5
Coaxial
2014
5
Routers
2017
3
Switches
2017
3
Cable Technician
2021
2
Low Voltage
2021
2
Structured Cabling
2021
2
Commercial
2018
1
Electricity
0
1